For your 650. Ours are 1000s.
|
|
|
What did you do in your garage today..?
- Thread starter Hack
- Start date
Mad Mike
Well-known member
Yours, maybe. Here's mine:
Attachments
sburns
Well-known member
Should also be a sticker on the bike as well with what fuel to use.
Same here. All that siht is the first thing to go.
I keep a binder for all my cars/toys and with the bikes I peel the stickers off and place them on the cover of the binder for quick reference. Tire pressures I can memorize but things like chain slack are nice to have close by the tools required.
I don't need stickers to remind me to wear a helmet and of what fuel grade I need.
Do you?
Between my enduro and my wife's, I do literally 12-16 oil changes a season.
.... and I STILL need to look up the manual for the torque specs on all the filters and bolts.
Every single bloody damn time.
Doesn't help that there's a magnetic drain plug, two screens and a traditional oil filter, all with different torque specs.
At least I've memorized which wrench to use.
.... and I STILL need to look up the manual for the torque specs on all the filters and bolts.
Every single bloody damn time.
Doesn't help that there's a magnetic drain plug, two screens and a traditional oil filter, all with different torque specs.
At least I've memorized which wrench to use.
sburns
Well-known member
Sometimes...
Nah but like for tire pressure I do. I never seem to remember those numbers.
Sometimes...
Remembering tire pressures, I'm okay with.
In the dirt, we're always f-n around with the pressures trying to find a setting that's good for us personally, so you commit these numbers to memory pretty quickly, always airing up and down, on and off-road.
For the adventure bikes and the street bikes, we have TPMS, and the pressures are always on the home screen. Day-to-day you notice when your pressures are slowly dropping from stock.
Between my enduro and my wife's, I do literally 12-16 oil changes a season.
.... and I STILL need to look up the manual for the torque specs on all the filters and bolts.
Every single bloody damn time.
Doesn't help that there's a magnetic drain plug, two screens and a traditional oil filter, all with different torque specs.
At least I've memorized which wrench to use.
You ought to write yourself a torque spec cheat sheet. Look it up once, then never again.
You know how many times I've said that to myself when I'm thumbing through the manual...?
12-16 times a season.
Lazy MF#1 right here.
On my FZ6 the VIN sticker was in a hi viz area so off it came. No big deal the numbers are stamped on the frame. The only things left were the triple tuning forks which were clearcoated over.
Did a exhaust resonator delete on a 2019 BMW F750GS today. Essentially removing this 8 lb resonator box, and replacing it with this half-pound link pipe specifically made for the F750GS/F850GS instead.
(the resonator is in the wrong way in the pic but you get it)
The resonator delete pipe is < $100 from TEMU, who sent to me for free... and like when anything comes free in life, I was very concerned.
Is this going to sound like poop?
Is this going to run like poop?
Is this going to set off expensive BMW error codes that will make me poop myself?
etc.
Honestly...
This thing is amazing!
It's not stupid loud, but it gives the bike more sound that is much more deep. It's outgoing but in no way obnoxious... whereas it used to be a quiet reserved subdued German. Touring will be no issue with it. It's quieter than my G650GS with a Dominator pipe, and maybe a little louder than my BMW G650GS with a Leo Vince in Italy. I tour on both.
I couple years ago when I had an F700GS in the garage, I put a pipe on it, and, it was pretty good... for an F700GS. There's just only so good that engine configuration can sound. But the F750GS/F850GS with it's 853cc twin firing at 270 degrees, and this resonator delete, **** me, it's given me a whole new level of respect for this motorcycle! It sounds like it commands more respect too!
Re: the weight savings, yup, saved 7.5 lbs. Along with switching to a lithium battery I've probably saved about 10-11 lbs now... but I'll add some GIVI brackets soon and that'll cancel out. Can't say I felt a difference if I'm being honest. This bike has 6" of travel in the back, 7" or so in the back, and electronic and dynamically adjustable suspension and is pretty well balanced, so it already handles great.
The only issues were:
1) It came with no rubber grommet. I thought putting one in would help avoid vibration so I kind of cut one to size and made it work.
2) The mount for the heat shield... You need to put the bolts in, in a certain order, or they won't both fit. Also part of the heat shield is rubbing against the exhaust (no clearance)... so I might take the heat shield off and grind that corner off.
All in all, considering this mod is < $100 and < 30 minutes, what's not to love?
(the resonator is in the wrong way in the pic but you get it)
The resonator delete pipe is < $100 from TEMU, who sent to me for free... and like when anything comes free in life, I was very concerned.
Is this going to sound like poop?
Is this going to run like poop?
Is this going to set off expensive BMW error codes that will make me poop myself?
etc.
Honestly...
This thing is amazing!
It's not stupid loud, but it gives the bike more sound that is much more deep. It's outgoing but in no way obnoxious... whereas it used to be a quiet reserved subdued German. Touring will be no issue with it. It's quieter than my G650GS with a Dominator pipe, and maybe a little louder than my BMW G650GS with a Leo Vince in Italy. I tour on both.
I couple years ago when I had an F700GS in the garage, I put a pipe on it, and, it was pretty good... for an F700GS. There's just only so good that engine configuration can sound. But the F750GS/F850GS with it's 853cc twin firing at 270 degrees, and this resonator delete, **** me, it's given me a whole new level of respect for this motorcycle! It sounds like it commands more respect too!
Re: the weight savings, yup, saved 7.5 lbs. Along with switching to a lithium battery I've probably saved about 10-11 lbs now... but I'll add some GIVI brackets soon and that'll cancel out. Can't say I felt a difference if I'm being honest. This bike has 6" of travel in the back, 7" or so in the back, and electronic and dynamically adjustable suspension and is pretty well balanced, so it already handles great.
The only issues were:
1) It came with no rubber grommet. I thought putting one in would help avoid vibration so I kind of cut one to size and made it work.
2) The mount for the heat shield... You need to put the bolts in, in a certain order, or they won't both fit. Also part of the heat shield is rubbing against the exhaust (no clearance)... so I might take the heat shield off and grind that corner off.
All in all, considering this mod is < $100 and < 30 minutes, what's not to love?
Filled in a large paint chip in the hood that of course missed the ppf film. Used a toothpick but the clear (which has the pearl/flake in it) is just a bit too high. Haven’t decided if I should scrape it down, sand it, or just leave it as is. Wet sanding and a compound/polish worked fine on the 16yr old suv but I’m more hesitant to do it on a 4yr old van.
Attachments
Transmission fluid change in the family hauler. Honda’s directions are annoying so I simplified it (not recommended if someone else may have serviced the transmission though as they may have altered oil amount). Drained it, measured what came out, put the same amount of new fluid back in being sure both were at same temperature. I also used the vent hole on top to add fluid (this used to be a dipstick tube before Honda and others had the bright idea to delete dipsticks). New fill location and level checks are bolts on the side of the transmission (no thanks). Honda dealer originally gave me the incorrect fluid and when I asked them if they were positive they gave me the correct one as the previous year had two different transmission/fluid they went in the back and came back with different fluid after speaking to a tech. They also gave me incorrect sized crush washers so I reused the original one.
Attachments
If I wore contact lenses and dropped one on that floor. I'd pick it up immediately and have no qualms about sticking it right back in my eye.
Probably even the slice of pizza I dropped topping side down...
|
|
|
|
|