Enough of COVID...what are you doing to the house? | Page 248 | GTAMotorcycle.com

Enough of COVID...what are you doing to the house?

thanks…I found this stuff which looks pretty foolproof for a quick fix


I might just get a few tubes to do the worst and get it professionally done next year.
I have used it, while it is easy to use the colour will stick out like a sore thumb and it will forever as it does not patina/age. The rrepair will always be obvious.

If you use regular mortar (example N or O like MM said, which one depends on brick hardness) as long as you are working in the greys it will age and disappear over time. You also have the option of colouring it if you want to go that far.

It is a trade-off with the tube stuff.
 
I have used it, while it is easy to use the colour will stick out like a sore thumb and it will forever as it does not patina/age. The rrepair will always be obvious.

If you use regular mortar (example N or O like MM said, which one depends on brick hardness) as long as you are working in the greys it will age and disappear over time. You also have the option of colouring it if you want to go that far.

It is a trade-off with the tube stuff.

This is for 2 chimneys I can’t see unless I’m on the roof.
 
This is for 2 chimneys I can’t see unless I’m on the roof.
If you're going to put the time in, do it right. The tube stuff is a ***** to remove if you want to really fix it later.

Regular brick mortar isn't that hard to work with, you can even squeeze it in with your fingers (wear rubberized gloves).
 
Has anyone done parging on the foundation? My diy list for next year isn’t too big so I was thinking of doing this to dress up the foundation that’s showing.
 
Has anyone done parging on the foundation? My diy list for next year isn’t too big so I was thinking of doing this to dress up the foundation that’s showing.
My house came with it done. Mostly holding up. A section between the garage doors is cracked and loose but staying in place if nobody bangs it. They did a stucco look instead of plain cement parging.
 
Ugly ceramic gone , now just waiting on granite guy View attachment 57989


Sent from my iPhone using GTAMotorcycle.com mobile app
Looks like you got lucky. I took out over 400 kitchens when I was the Salvage Co-ordinator for Habitat Restore in London. Most tiled c/t was thick plywood screwed down prior to tiles. Always a pecker to remove - had to bust thru the tile to get to grout filled screws.
 
Nobody listens but there’s really not much that the judicious use of explosives cannot do.
Is this in reference to repointing a chimney, parging a foundation or removing a counter? For any of those jobs, explosives wouldnt even make my top ten list of ways to try.
 
Nobody listens but there’s really not much that the judicious use of explosives cannot do.
Do you want a new chimney? Cause explosives can make this happen.

Put enough in and you’ll have space for a new foundation!
 
Looks like you got lucky. I took out over 400 kitchens when I was the Salvage Co-ordinator for Habitat Restore in London. Most tiled c/t was thick plywood screwed down prior to tiles. Always a pecker to remove - had to bust thru the tile to get to grout filled screws.

Mine was tile / 1/2 layer of cement underlay board / 2 layers of 3/4 ply , all screwed down from above through each other . It was not pretty coming out .


Sent from my iPhone using GTAMotorcycle.com mobile app
 
Please tell me you're not using "mosaic" tile like I see a scrap of at the right. It's so over used everywhere now it's becoming a cliche.
 
No the tile is a 2 1/2 x 5 gray/white tone marble that will go on subway style . I hate installing mosaic. Just did glass tile tiny hexagons for a friend , what a pain to install , and then grout .


Sent from my iPhone using GTAMotorcycle.com
 
On a poorly supported substrate where larger tile might crack, tiny hexagons are your friend but the tile to grout ratio not so much.
 

Back
Top Bottom