Not sure about the YZ but It's a funny plug in the KX (NGK R6918B-8) which is is for racing and is about $30. I run a BR8ES which is $5 and dosen't oil up as bad. You could also try going down on size on the Pilot
|
|
|
Yz125 as a trail bike
- Thread starter Vova
- Start date
Chris-CJ
Well-known member
+1 for John at Accelerated Technologies.John is probably your best bet for this-although I would probably do this as a last resort.
Home - Accelerated Technologies
Services Lowering SAG & Set Up Track Preparation Fork Service & Tuning General Service Shock Service & Tuning Parts Accelerated Technologies Welcome to Accelerated Technologies. As Motorsports Suspension specialists we specialize in suspension of all kinds including street bikes, road racing...acceleratedtechnologies.ca
Do it once and do it right, John is an expert.
I say this from experience.
Mp1 suspension is your guy for dirt bikes best in Ontario.
Sent from my KFMAWI using Tapatalk
That’s exactly what he told me to use the 8 instead of the 9 stock plug, the eight burns hotter or something like that
boyoboy
Well-known member
if you don't have insurance you can still ride.
the mx track out chatsworth way / hwy 6 is great for midweek riding on the cheap. no crowds mid week - bike shop- restaurant- shade in the trees... track almost to yourself, no insurance req'd (yikes)
best luck, great bike !
of course this is all dependent on the covid situation
the mx track out chatsworth way / hwy 6 is great for midweek riding on the cheap. no crowds mid week - bike shop- restaurant- shade in the trees... track almost to yourself, no insurance req'd (yikes)
best luck, great bike !
of course this is all dependent on the covid situation
Good hand guards and proper riding gear. That's it for now until you ride it and then can see after some experience what you want to change.
Do some research on Thumpertalk or wherever to see what guys find works for jetting and mix ratios for woods riding and oil types.
No sense doing any suspension or other mods right now other than handguards and a skidplate (Acerbis and Cycra should have good low-cost options available). You're new and your speed/level will increase quickly so suspension setting now will be totally different to how it will be after a couple months when your pace is better. You're gearing will be affected the same way.
Do some research on Thumpertalk or wherever to see what guys find works for jetting and mix ratios for woods riding and oil types.
No sense doing any suspension or other mods right now other than handguards and a skidplate (Acerbis and Cycra should have good low-cost options available). You're new and your speed/level will increase quickly so suspension setting now will be totally different to how it will be after a couple months when your pace is better. You're gearing will be affected the same way.
You could just try lowering links. Very easy to install (1/2 hr with beer break).
Koubalinks.com - just got links for my KLX250
I was going to get the 125X but I could only find the 125, everything is sold out
|
|
|
|
|