r6 License Plate mounting!

yamanerdem

yamanerdem

New member
Hi,
I just got a 2006 yamaha r6, and I wanted to mount my license plate further down the back of the bike (near the rear hugger), and I was wondering as to how to do this and if there are mounting kits for such application?
 
You can make your own mount or check eBay for inexpensive kits.

Btw have you thought about the tickets you'd be getting?
 
i have a competition werkes FE kit, keeps my plate near my hugger and i havent had an issue with it so far
 
yamanerdem said:
Hi,
I just got a 2006 yamaha r6, and I wanted to mount my license plate further down the back of the bike (near the rear hugger), and I was wondering as to how to do this and if there are mounting kits for such application?
Click to expand...

Check these out

http://www.amazon.com/Yamaha-2003-3...sr_1_sc_3?ie=UTF8&qid=1330307738&sr=8-3-spell
http://www.amazon.com/2006-2011-Eli...sr_1_sc_2?ie=UTF8&qid=1330307738&sr=8-2-spell

http://competitionwerkes.com/products/Yamaha/2010/R6/standard-fender-eliminator-93
 
FYI to the OP:

http://www.gtamotorcycle.com/vbforu...TA-law-about-license-plate-is&highlight=plate

matthew said:
Number plate to be kept clean
(2) Every number plate shall be kept free from dirt and obstruction and shall be affixed so that the entire number plate, including the numbers, is plainly visible at all times, and the view of the number plate shall not be obscured or obstructed by spare tires, bumper bars, any part of the vehicle, any attachments to the vehicle or the load carried. 1994, c. 27, s. 138 (7).
Click to expand...

Rob MacLennan said:
The reflector is required under CMVSS, not the HTA

http://www.tc.gc.ca/eng/acts-regulations/regulations-crc-c1038-sch-iii.htm

HTA section 13 covers number plates. Section 62 covers lamps. Your plate is neither clearly visible to following vehicles, nor is it visible to a photo RADAR or highway toll camera, and so is illegal. It is not mounted at the rear of the vehicle, and so is illegal.
Click to expand...
 
frekeyguy said:
Btw have you thought about the tickets you'd be getting?
Click to expand...

I got pulled over last summer for a bent plate (hard landing off some railroad tracks). Cop let me go but hassled me a bit about the cut fender (previous owner) and told me that plates mounted deep under the tail piss them off. He was a bike cop. Might've just been him but it was enough to make me forget about the idea.
 
You must log in or register to reply here.
Back
Top Bottom