Need a copper washer.

[Wingboy]

id-8mm od-14mm th-1.5mm.Any ideas where?I've tried brafasco,bolts plus,home depot,etc etc.

 

[corpse]

whats it for?

 

[FiReSTaRT]

Crappy tire sells some copper oil plug washers, but I'm not sure about the ID/OD.

 

[corpse]

part source sells all kinds of automotive parts that might work, but they will ask the same question i did.

 

[Wingboy]

Tried partsource tonly sae.

 

[corpse]

Try motorcycle salvage yards, im assuming the parts are too old for the dealer to carry.

 

[Greg.crx]

A 5/16 should be close enough no? It's just a copper washer

 

[inreb]

Try Dual Sport Plus

 

[Wingboy]

Try motorcycle salvage yards, im assuming the parts are too old for the dealer to carry.

it's a 2011.

A 5/16 should be close enough no? It's just a copper washer

Couldn't find one.

Try Dual Sport Plus

they are the dealer for ossa.The factory is in financial difficulty and no parts are available for a while.At least they had a piston for my rebuild.

 

[RonnieRev]

search banjo bolt washers, you should be able to find what you are looking for

 

[theraymondguy]

Jiffy lube / similar.

 

[smergy]

Hey rick, you're probably only searching for one, but sometimes your time is worth more. Maybe honda/suzuki/etc has one on a parts fiche?


https://www.rockymountainatvmc.com/p/988/45479/Tusk-Crush-Washer-Kit-50-Piece

https://www.jakewilson.com/p/3934/45373/Bolt-Aluminum-Crush-Washers?term=7.48 od

http://www.gnarlyparts.ca/Tusk-Crush-Washer-Kit-50-Piece_p_1111.html

 

[bitzz]

id-8mm od-15mm th-1.5mm.Any ideas where?I've tried brafasco,bolts plus,home depot,etc etc.

I have some 8.8 id x 17.42 od x 1.41 thick in Mississauga

send me an email if you want them
jim at bitzz dot com

 

[bitzz]

whats it for?

Does it matter?

 

[Wingboy]

Hey rick, you're probably only searching for one, but sometimes your time is worth more. Maybe honda/suzuki/etc has one on a parts fiche?


https://www.rockymountainatvmc.com/p/988/45479/Tusk-Crush-Washer-Kit-50-Piece

https://www.jakewilson.com/p/3934/45373/Bolt-Aluminum-Crush-Washers?term=7.48 od

http://www.gnarlyparts.ca/Tusk-Crush-Washer-Kit-50-Piece_p_1111.html

Thanks,but they look mostly like aluminum crush washers.

I have some 8.8 id x 17.42 od x 1.41 thick in Mississauga

send me an email if you want them
jim at bitzz dot com

Almost.Too big tho.Everything on this bike is VERY compact.

Does it matter?

Sure.It's a 2011 Ossa TR280i.

 

[Skully]

id look in the help section of ctc, any brake shop/caliper rebuilder will have assorted copper crush washers

 

[Robp]

This might sound silly I guess, but can't you find a smaller one and use a dremel to get it to the right size? I know it's small.

 

[crankcall]

if you had a copper penny and a drill press, unlimited supply.

 

[DoubleJ]

Definitely flat side a few solid copper pennys. Hope you horded some for future endevours!

 

[Wingboy]

A penny is a great idea.There should be one made before 1996 in my collection.Thanks for the ideas guys.Now i can put the rest of the motor back together and when JohnnyP is done my powdercoat,i can put the bike back together.Didn't think this would take all winter.