Motorcycle jack | GTAMotorcycle.com

Motorcycle jack

I use it for my bikes. modified it slightly to make it span a little more to make it slightly less tippy.
 
Been using the same jack for a couple of years, used it to keep my (ex) Suzy M90 off the ground during winter.
 
I also use one to keep my M50 off the ground in winter In my shed. It’s a tight fit and the jack allows me to maneuver the bike out of the way. It also saves space as it sits straight up on the jack.
 
These would be great(er) if they could be used on bikes outside of the cruiser and dirt bike/off-road category.
 
I used one for my 1500 Goldwing. Close to 1000 pounds. It seemed tippy but never dropped the bike.
 
Thanks for the replies, I think I'll grab one and give it a try. A lot of times manufacturers are a little optimistic about the maximum weights, I plan on using this on an Electra Glide and don't want any accidents!
 
willyt said:
Thanks for the replies, I think I'll grab one and give it a try. A lot of times manufacturers are a little optimistic about the maximum weights, I plan on using this on an Electra Glide and don't want any accidents!
Click to expand...
I have one and have used it on an Electra Glide, couple Street Glides and my old Victory Magnum. Also used it on a 900lb ATV. Works great.
 
Chris-CJ said:
what modification have you done, please share!
Click to expand...
I took the top piece off that the bike sits on. Then I cut the support between it's two sides so that I have two pieces. I then bought longer bolts so that the top pieces could be re-mounted outside of the frame instead of on top.
 
I had that one and it worked fine. You may want to search on Marketplace, you could probably find it much cheaper used.
 
You must log in or register to reply here.

Back
Top Bottom