Front SS brakes line from a 2003 sv650s on a 2000 sv650s

[Domon]

Forum Sponsor

Hey guys, I found a good deal on new SS brakes line for my 2000 sv650s but they are for a 2003 sv650s. I know 03 is the 2nd gen but when I
looked up specs on the calipers and rotors; They are the same. Can anyone confirm this?

 

[matthew]

I don't believe the brakes changed but double check the length of the hoses between the two models.

 

[Domon]

I'll measure the lines of mine and post it and hopefully some on here has a 2nd gen they can compare with me.

Thanks Matthew.

 

[Domon]

So I measured my 2000 sv650 and the brake lines are around ~33 inches to furthest caliper and about ~28 inches to the caliper on the same side as master cylinder.
If anyone with an 03 sv650 can measure there brake lines and let me know what there length is that would be awesome.

 

[blackcamaro]

I don’t own a SV so can’t help you there but a quick look on a parts diagram and it looks like the routing is quite a bit different. I would probably try to find some lines made for your bike instead of messing with the ones for a 2003.

 

[Domon]

yeah I saw that parts pic. The ones im looking on ebay for the 03 sv650 are the race setup where each line goes from master to each caliper. I also found out the suzuki for those years all use a 10mm banjo bolt connection on master and calipers.

 

[TK4]

yeah I saw that parts pic. The ones im looking on ebay for the 03 sv650 are the race setup where each line goes from master to each caliper. I also found out the suzuki for those years all use a 10mm banjo bolt connection on master and calipers.

Russel part #

2003-06

SV650S

-

R08432S

Forum Sponsor