$2000
This is the jewellery of TIG welders, You want to make the stunning welds like the pros? This is the machine that lets you do it. Not a cheapie Can Tire welder.
• Square wave AC output gives superior welding with improved cleaning and lack of rectification
• AC wave balance control- Allows adjustment from maximum cleaning to maximum penetration
• Arcforce control- fine tunes stick welding from soft to high penetration, digging arc
• Two stroke non-HF start or Four stroke with HF start
• Direct connection for TIG torch or Electrode holder (not incl) for greatest convenience
• Small and portable inverter (29lbs)
• 10-160 Amp AC and DC TIG Welding
• Adjustable downslope control
• Presettable start current
• TIG Duty Cycle 40%
• Stick Duty Cycle 35%
• Converted from trigger to pedal operation
• Owned LD-55CF Argon tank (3/4 full)
• Upgraded ball style regulator
• Over $500 worth of spare torch parts and ceramics and
tungstons
• Aprox 10lb assorted SS and AL weld wire
240V 30A Single Phase Input
This is not a cheap CT welder. A serious high quality inverter TIG welder with a bunch of extras with little use. Welder alone sells for 3-3500 with all the extras you are looking at over 4K in new value. I have a large MIG with an AL spool as well as a Stick I just dont use this very much. Located in Newtonville.
This is the jewellery of TIG welders, You want to make the stunning welds like the pros? This is the machine that lets you do it. Not a cheapie Can Tire welder.
• Square wave AC output gives superior welding with improved cleaning and lack of rectification
• AC wave balance control- Allows adjustment from maximum cleaning to maximum penetration
• Arcforce control- fine tunes stick welding from soft to high penetration, digging arc
• Two stroke non-HF start or Four stroke with HF start
• Direct connection for TIG torch or Electrode holder (not incl) for greatest convenience
• Small and portable inverter (29lbs)
• 10-160 Amp AC and DC TIG Welding
• Adjustable downslope control
• Presettable start current
• TIG Duty Cycle 40%
• Stick Duty Cycle 35%
• Converted from trigger to pedal operation
• Owned LD-55CF Argon tank (3/4 full)
• Upgraded ball style regulator
• Over $500 worth of spare torch parts and ceramics and
tungstons
• Aprox 10lb assorted SS and AL weld wire
240V 30A Single Phase Input
This is not a cheap CT welder. A serious high quality inverter TIG welder with a bunch of extras with little use. Welder alone sells for 3-3500 with all the extras you are looking at over 4K in new value. I have a large MIG with an AL spool as well as a Stick I just dont use this very much. Located in Newtonville.
