Boat Rentals

Forum Sponsor
This guy posted a drone flyover and some pics. He had a Cruisers 38 in the building that is terminal. Comments to video have another video with roof entirely removed. Steel ibeam legs broke off at waterline.

https://www.facebook.com/video.php?v=1117609043500408

Facebook

www.facebook.com www.facebook.com

482057148_10170667481215244_5880741149022824076_n.jpg
 
Last edited:
Seems like it may be corrosion related, perhaps that should have been tended to.

Score 1 for outside plastic wrapped storage vs inside I guess.
 
PrivatePilot said:
Seems like it may be corrosion related, perhaps that should have been tended to.
Click to expand...
Maybe. Hard to tell without an up close picture. Add many tons to the roof without proper diagonal bracing and if it starts to rack, loads at the bottom of the legs quickly become incredibly large. Corrosion reducing the section doesn't help but even new piles might not have survived the applied loads. I suspect the new roof will have more slope.
 
I think the fact that it broke where it did, right at the waterline, right at the area of the most visible rust (quite possibly leading to thinning of the metal) is pretty telling alone.
 
PrivatePilot said:
I think the fact that it broke where it did, right at the waterline, right at the area of the most visible rust (quite possibly leading to thinning of the metal) is pretty telling alone.
Click to expand...
Assuming the ice was thick, that is also the area of the highest stress.
 
Amen to that , we spent twenty K rebuilding a four fifty four gas guzzler for a boat we paid sixteen grand for , that would sell today for twelve K


Sent from my iPhone using GTAMotorcycle.com
 
That's perfect size personal boat. I always regretted selling my 15' Bayliner. So easy to handle in and out on my own and excellent fishing platform as could lean against the rails.
Buddy still has his decades on.
1741641984738.png
Got into 22' Bayliner i/o - too big to trailer for me easily. Bad choice.
Some notion of overnighting with the kids ....too small.
15' was 👌
 
We looked at a twenty eight ft Limestone , Volvo outdrive with cuddly cabin and a really nice aluminum trailer in Picton last week. Ask was Thirty two K which for that boat wasn’t bad . Sadly ( or not ) we took a couple days to think about it and an offer went in Monday . Sold in five days after listing , the good stuff still sells fast .


Sent from my iPhone using GTAMotorcycle.com
 
crankcall said:
We looked at a twenty eight ft Limestone , Volvo outdrive with cuddly cabin and a really nice aluminum trailer in Picton last week. Ask was Thirty two K which for that boat wasn’t bad . Sadly ( or not ) we took a couple days to think about it and an offer went in Monday . Sold in five days after listing , the good stuff still sells fast .
Click to expand...
Assume you mean a 24? I'm reasonably sure Limestone never built a 28, though Medeiros did under the Hunt brand, I think. Though with that XL beam, the 24s do feel a bit like a 28...

$32k for a clean Medeiros-built example (meaning newer, not necessarily better than the Hinterhoeller ones) with a reasonable hour motor and non-government layout (mid-mount motor, full transom bench seating) would have been a heck of a steal.

When we were looking at Limestones, anything under $50k was either really old, had an ancient motor, or was an ex-government boat with a rear-mount motor. Not that there's anything wrong with the above, it just affects the price. Our 20 was oldish (early Medeiros build), had a rebuilt carbureted (carburetted?) Mercruiser 5.7, and was ex-DFO, but was priced acordingly.

We looked very closely at an ex-RCMP 24 that had been decently restored and had a spotless 502 Mag MPI (8.2) shoehorned into the back with a Bravo outrive for not far above the asking on yours. Ended up passing because maintenance would've been a nightmare with no more than 2-3" of clearance to the deck and transom all the way around, and it was just way more motor than we needed. Would've been fun between fill-ups, at least...

1741791142059.jpeg
1741790890638.jpeg
 
How the heck did they even get that in there, split the upper and lower portions of the hull? It seems like it would be physically impossible to even get in there to bolt up the motor mounts, much less hookup anything else.
 
PrivatePilot said:
How the heck did they even get that in there, split the upper and lower portions of the hull? It seems like it would be physically impossible to even get in there to bolt up the motor mounts, much less hookup anything else.
Click to expand...
The surround on the transom comes off super easy (you can see a chromed finger nut on the port side). Otherwise, I'm fairly sure the raised and textured portions of the cockpit desk can come out as well, though with a bit more work.

Still, all a pain, and either means more swearing and busted knuckles if you do it yourself, or a bigger bill if you pay someone...
 
Priller said:
The surround on the transom comes off super easy (you can see a chromed finger nut on the port side). Otherwise, I'm fairly sure the raised and textured portions of the cockpit desk can come out as well, though with a bit more work.

Still, all a pain, and either means more swearing and busted knuckles if you do it yourself, or a bigger bill if you pay someone...
Click to expand...

Ok, that at least makes it remotely workable.

Some of the boats we looked at for my sister and BIL’s hunt were also insanely packed in the engine bay that there was simply no way to work on some things as the hull didn’t have enough access. On one in particular the hot water tank was in a spot where it couldn’t be replaced. I googled it and found one person who had to do that once (wasn’t winterized properly and split) and they had to pull the intake, exhaust, cooling system and then the cylinder head (!!) off the one side of the port engine to get the old tank out and the new tank in. Rediculous.

The big thing that we love about the Doral they’ve settled on is that literally half of the cockpit area (about a third of the LOA of the boat) is engine hatch, operated on a single switch with hydraulic rams. It opens up into a nice space with tons of room to work.
 
Yes sorry twenty four express cruiser , limestone by Maderios, on a triaxle Excalibur trailer . Boat is listed on Boatdealer.ca . I’m not surprised it sold fast , I was a bit wonky since I already own more than one boat , but darn it was clean and not molested . And wife wants a travel trailer …….


Sent from my iPhone using GTAMotorcycle.com
Forum Sponsor
 
You must log in or register to reply here.
Back
Top Bottom