Chris-CJ
Well-known member
PM'd, thanks
|
|
|
BMW service/shop?
- Thread starter Chris-CJ
- Start date
Blacque Jacque Shellacque
Well-known member
I believe the R9T has the round BMW service connector. ODB2 blue tooth scanners use the standard rectangular connector that has been in cars since at least the late 90's. You would require a converter cable that connects the two different interfaces. The newer BMW wethead models now come with the standard ODB2 connector. The manufacturer of the GS911 made an adapter cable so the GS911 can be used on the ODB2 connection. It should work for an ODB2 scanner. But the cable would be reversed. Search for a" HEX Code 10 Pin to OBD Male Adapter for GS-911"
Twisted throttle has them listed on their site.
You can purchase the OBD Link MX or Lx on Amazon
DO NOT get a fake one from China, it will not work as you need to be able to send long characters to do the reset or other service applications like cycling the ABS pump etc.
You will need Motoscan Professional level to do the reset.
If you bike is newer than 2017 you just need the OBD2 Link, if older you also need the connecting cable.
DO NOT get a fake one from China, it will not work as you need to be able to send long characters to do the reset or other service applications like cycling the ABS pump etc.
You will need Motoscan Professional level to do the reset.
If you bike is newer than 2017 you just need the OBD2 Link, if older you also need the connecting cable.
GateKeeper
Well-known member
I used this for my 2005 K1200s, I just lost interest in mucking around, it was not simple
thank y'all for chiming in
Yep bought my Ducati from them....
And still said 6 weeks eh. Ouch.
|
|
|
|
|