Anyone in gta do suspension setups?

[Xtina]

Forum Sponsor

And how much? I want to get my r6 tuned to my weight.

 

[vrus]

pro6!

 

[Xtina]

pro6!

Whereabouts are they?

 

[matthew]

Whereabouts are they?

http://bit.ly/HuDdjC

 

[Xtina]

http://bit.ly/HuDdjC

Ha ha haaaaa....

 

[ViperZ]

Xtina, let us know how much it will cost. They are very close to me, so I wouldn't mind doing it on my bike if it's cheap enough

 

[RedDogDarren]

And how much? I want to get my r6 tuned to my weight.

Just crank the preload to maximum.

 

[dru9]

Just crank the preload to maximum.

Ouch!

 

[boooya]

John Sharrard from Accelerated Technologies.
Hes out in Lakefield but you wont find anyone better to do your suspension. I cant say enough good things about this guy, he definatly knows his stuff.

 

[Turbo gpz]

Z1 cycletech. One of the only shops in the gta with data-logging and Canadian Superbike experience.

 

[Serialize]

plenty of good places, obviously Ryan Gill now at Pro6 would be a perfect place to start.

 

[Serialize]

Z1 cycletech. One of the only shops in the gta with data-logging and Canadian Superbike experience.

There are other shops with Canadian Superbike experience (Riders Choice, Pro6, etc) ...

 

[vrus]

There is also Jon Cornwell who is an Ohlins specialist and *I think* raced in ama and worked in wsbk. He's in Erin, Ontario.

 

[Serialize]

There is also Jon Cornwell who is an Ohlins specialist and *I think* raced in ama and worked in wsbk. He's in Erin, Ontario.

I think WSBK. But it's likely tough getting that apppointment though.

 

[SLIM]

And how much? I want to get my r6 tuned to my weight.

Your description is vague. What exactly are you looking to have done? Do you want your sag set using your current suspension components or are you looking to have springs and valving altered or ... ?

If all you want is your sag set up you can do that yourself very easily. There are plenty of articles online that show you how. If you are unsure then come up here and i'll do it for dirt cheap.

 

[BimmerMike]

John Sharrard from Accelerated Technologies.
Hes out in Lakefield but you wont find anyone better to do your suspension. I cant say enough good things about this guy, he definatly knows his stuff.

I second that....he is out in the boonies but the upside is after he finishes your bike his shop is about 6Km from the bottom of hwy 507...so you can road test his work!

Accelerated Technologies - Motorcycle Suspension Specialist

 

[ZX600]

And how much? I want to get my r6 tuned to my weight.

Just set the sag and you will be fine,unless you are planning to race.

You tube is your friend, just make sure you understand what you are doing

 

[Wingboy]

Just set the sag and you will be fine,unless you are planning to race.

You tube is your friend, just make sure you understand what you are doing

She might be a LOT better off with springs installed suited to her weight.Preload settings don't always give enough.

 

[Xtina]

Would the fact that it's lowered an inch below stock make a difference in any of the numbers?

 

[Wingboy]

Prolly depends on how hard you push it.(ground clearance)

Forum Sponsor