2007 r6

yammyr6

Well-known member
So my two plate light wires touched metal. Now when I turn the key to on I don't get the red tach backlight, as well as my rear brake running light and 3rd eye light. Everything else works signals brake light havent check headlights yet.

Fuses look ok what fuses would it be
 
Fuses look ok what fuses would it be
Fuses can "look" ok, check em with a multimeter continuity check function.

Also, were you just checking the main fuses? If I remember my 08 R6 I think there was another fuse block under the left upper fairing cover (the black piece that is directly under the left clip on)

-Jamie M.
 
Last edited:
Fuses can "look" ok, check em with a multimeter continuity check function.

Also, were you just checking the main fuses? If I remember my 08 R6 I think there was another fuse block under the left upper fairing cover (the black piece that is directly under the left clip on)

-Jamie M.
Yeah I checked those too. They looked ok. I guess ill pick up a multimeter and check. What fuse would be the dash lights though? The main fuse right?
 
Yeah I checked those too. They looked ok. I guess ill pick up a multimeter and check. What fuse would be the dash lights though? The main fuse right?
If I remember when I had a similar problem on my 08 R6 it was the "signal" fuse that did it.

r6_fuse.png


-Jamie M.
 
Back
Top Bottom