2007 r6

yammyr6

yammyr6

Well-known member
Forum Sponsor
So my two plate light wires touched metal. Now when I turn the key to on I don't get the red tach backlight, as well as my rear brake running light and 3rd eye light. Everything else works signals brake light havent check headlights yet.

Fuses look ok what fuses would it be
 
yammyr6 said:
Fuses look ok what fuses would it be
Click to expand...
Fuses can "look" ok, check em with a multimeter continuity check function.

Also, were you just checking the main fuses? If I remember my 08 R6 I think there was another fuse block under the left upper fairing cover (the black piece that is directly under the left clip on)

-Jamie M.
 
Last edited:
toysareforboys said:
Fuses can "look" ok, check em with a multimeter continuity check function.

Also, were you just checking the main fuses? If I remember my 08 R6 I think there was another fuse block under the left upper fairing cover (the black piece that is directly under the left clip on)

-Jamie M.
Click to expand...
Yeah I checked those too. They looked ok. I guess ill pick up a multimeter and check. What fuse would be the dash lights though? The main fuse right?
 
yammyr6 said:
Yeah I checked those too. They looked ok. I guess ill pick up a multimeter and check. What fuse would be the dash lights though? The main fuse right?
Click to expand...
If I remember when I had a similar problem on my 08 R6 it was the "signal" fuse that did it.

r6_fuse.png


-Jamie M.
 
You must log in or register to reply here.
Back
Top Bottom