Advice needed.. swapping stock kill switch

[shahfaisal]

I bought a aftermarket kill switch which is a 6 pin plug but the stock switch on my 06 gsxr 600 track bike is different kind... its not plug and play as i expected...

Blue is new aftermarket switch black is stock.

Advise/help appreciated.

 

[frekeyguy]

I bought a aftermarket kill switch which is a 6 pin plug but the stock switch on my 06 gsxr 600 track bike is different kind... its not plug and play as i expected...

Blue is new aftermarket switch black is stock.

Advise/help appreciated.

Is the wiring harness from a 750 or 600 ?

That plug looks like a 750 kill switch plug where it has extra prongs. Don't quote me -

 

[shahfaisal]

Is the wiring harness from a 750 or 600 ?

That plug looks like a 750 kill switch plug where it has extra prongs. Don't quote me -

It very well could be... i was hoping someone would just be like just ignore that one wire and connect all the same coloured wires.. guess it wont be that wasy..

Frame is of a 750.. engine is off a 600 so it very wel could be

 

[frekeyguy]

It very well could be... i was hoping someone would just be like just ignore that one wire and connect all the same coloured wires.. guess it wont be that wasy..

Frame is of a 750.. engine is off a 600 so it very wel could be

I gotta look, I have a harness from a burnt down 04/05 600 - i'll confirm the plug.

It should be easy to re-wire - just have to start at it for a bit.