I found an obscure posting on ADVrider for these tiny little loop-on-a-bolt thingies (for lack of a better description) and I drilled - as per their instructions - into the corners of the panniers so as not to mess up any of the inner workings. I bolted the loop onto the pannier, using plenty of caulking and having drilled the hole just shy of the thickness of the bolt, to maintain waterproof-ness. I also added a small rubber flat gasket under the washer, for added peace of mind (now it's turned all brittle, I could have done without).How did you strap those over your panniers minidisco?
I did the same thing to the top of the top case. I have the cheapie GIVI box E52, so the material is quite flimsy - can't strap weights or bulk to the top, but it's sufficient to strap on the odd few things for short hauls and short duration, and at low speed. The rest get bungie'd to the built-in plastic slots on the GS, and on the rear I mounted an oversized aluminium top rack with extra slots (onto which I have the 2 water bottles clipped on a $1 aluminium carabiner). Perfect setup - and when I'm not on a trip, the carabiners make the perfect helmet clips!
Mounting holes: see the "flat tabs" just above the rounded corners on the side case front flap? I drilled into the middle of those: one in each "tab". If you're extra keen on it, send me your email address and I'll send you detailed pics & instructions.
Last edited: