What are your upgrades this year?

got a puig rear hugger, flash2pass and new set of BT016 waiting to be installed

this will happen when i stop being so lazy

also looking at grabbing a scorpio-i900
 
Plan to upgrade bike to factory stock

Replace aftermarket oil with Manufacturer supplied oil
Ditto with aftermarket oil filter and chain lube

Time and resources permitting, complete tear down and rebuild to eliminate any aftermarket lube
 
If I don't sell my 07 zx6r
I want the following:
Ohlins steering dampener, new sproket/chain/valve adjustment/ tune up/ pazzo levers/ tinted windscreen/relocating my license plate to under my tail

if I sell I'll be getting an 09 + zx6r or 2011 Gsxr and probably keep it stockish for this season.
 
Tank bag for the KLR, switched it to solo seating to save money here in Aus and switching to semi- synthetic.
Sorting out a PLB so I can get lost with impunity here or there. :D
 
Have a topcase I need to install. Already keyed the locks, just need to mount the sucker. I got a fatter kickstand base, so need to attach that, but its a 4 screw kinda job, nice and simple, just what I need. I want to upgrade the seat to a sargeant saddle, but might save that for next year, the stock on a GS is better then any stock seat, outside of Ultra Classics and Goldwings, that I have sat on.

All I need to get going this year is a set of new tires to replace my more dirt oriented TKC 80's for some Tourance wheels.
 
WHEELIE BAR!

12'0 CLOCK BAR!

lmao!
 
flummox said:
Plan to upgrade bike to factory stock

Replace aftermarket oil with Manufacturer supplied oil
Ditto with aftermarket oil filter and chain lube

Time and resources permitting, complete tear down and rebuild to eliminate any aftermarket lube
Click to expand...

Holy crap! You really hate aftermarket products!
 
for now: Turtle wax to Autoglym wax :D

Future: saving up for steering damper....
 
Ported and ceramic coated exhaust headers, BT comm/audio system, custom seat.
 
Was able to get a good deal on the following over the winter as most of the other stuff was already done last year:

Ducati Performance Superpole seat
Solo seat cover
Woodcraft rearsets
Oberon 29mm Clutch Slave Cylinder
 
Need to install the following things:
- distribution/terminal block for accessories complete with fuse & relay
- 12V socket for GPS
- usb style charger
- oxford heaterz heated grips
- zero gravity corsa windscreen
- woodcraft frame sliders
- energy seat
 
Parts I'm getting for my 2003 CBR600RR

A Slip On
Powder Coating Rear Pegs and Mounts (Gloss Black)
Levers (Black)
New Mirrors to replace the scratched ones I have

Thats it for this year, enjoy my first full season!
 
Seems lots of GTAM'ers are doing their part to keep the economy goin.
 
Gopro 2, Revit rain suit, Michelin road 3...( from Riders Choice of course ) so I can rock the Gap in the April RAIN !!
 
steve220s said:
Need to install the following things:
- distribution/terminal block for accessories complete with fuse & relay
- 12V socket for GPS
- usb style charger
- oxford heaterz heated grips
- zero gravity corsa windscreen
- woodcraft frame sliders
- energy seat
Click to expand...

Here's a good reference for a DIY distribution block. I modified my version slightly by using a gang fuse block I purchased at a marine supply store. Installed the Oxford grips last year as well as the USB port, but be sure to add a barrier between the left hand grip and the handlebar (I used shrink tube) as the bar will radiate some of the heat away.

http://www.canyonchasers.net/shop/generic/relay.php
 
Done - installed new sprockets, front and rear, new chain , powdercoated rearsets, passenger peg hangers, rear hub , remounted taillight and license plate bracket

In Process - bike is at Accelerated Technologies for install of new rear shock, rebuilding forks , with new seals, pistons, oil and complete set-up for my height, weight, riding style etc

Near Future - Carbon bellypan, steering damper

that's a bit more than I planned on , but wth .......

Cheers , Les
 
cheekeebandito said:
Done - installed new sprockets, front and rear, new chain , powdercoated rearsets, passenger peg hangers, rear hub , remounted taillight and license plate bracket

In Process - bike is at Accelerated Technologies for install of new rear shock, rebuilding forks , with new seals, pistons, oil and complete set-up for my height, weight, riding style etc

Near Future - Carbon bellypan, steering damper

that's a bit more than I planned on , but wth .......

Cheers , Les
Click to expand...

You have way too much time on your hands Les (LOL).
Forum Sponsor
 
You must log in or register to reply here.
Back
Top Bottom