Need powder coating done......

przemek

przemek

Member
Site Supporter
Forum Sponsor
CBR frame to be coated.

The frame is alreaqdy chem stripped.

Looking for a polyester Neon yellow blend, or polyester hybrid. prefer a single coat application.
id have to see sample if possible im trying to match the rest of the bike. replacing a tweeked frame.

PLease mesg me back, i can prep the bike if you provide me with thermal tape and i think i have some thermal plugs.


thanks

PM ME. need it done ASAP.
 
PM Zed-x-Rex, he'll give you a decent price, but more importantly, he will do the job properly. :thumbup:
 
is there a good powder coater in Durham (Pickering, Ajax, Whitby)? Good price per rim? thanks
 
There is a place called Bright Side Engineering at 701 Brock Street in Whitby. I've seen some stuff that he has done and it looks really good but he is a little bit on the expensive side

ABC Powder Coating in Port Hope is a good choice. They do a good job and the price is reasonable. They have done many parts for me and I've always been pleased. A lot of the VRRA guys use them as well.

There is also Amara in Pickering. I had him do a set of fork legs but he just put the powder on over the peeling laquer and it all peeled off in strips a couple of weeks. I dont think he knew what he was doing and wouldn't re-do them for me. I was dealing with the owner Brian.
 
Any idea how much ABC charges per rim? thnx
Delboy said:
There is a place called Bright Side Engineering at 701 Brock Street in Whitby. I've seen some stuff that he has done and it looks really good but he is a little bit on the expensive side

ABC Powder Coating in Port Hope is a good choice. They do a good job and the price is reasonable. They have done many parts for me and I've always been pleased. A lot of the VRRA guys use them as well.

There is also Amara in Pickering. I had him do a set of fork legs but he just put the powder on over the peeling laquer and it all peeled off in strips a couple of weeks. I dont think he knew what he was doing and wouldn't re-do them for me. I was dealing with the owner Brian.
Click to expand...
 
Total Coatings in Stoney Creek did my rims in fluorescent orange (makes Repsol orange look brown by comparison). Two years and many many tire changes later they have stood up very well.
 
Brightside did my frame and swingarm for my 1973 CB750 rebuild.
It looks great, and didn't cost an arm and a leg.
They actually borrowed my frame for the bike show as a demo it looked so good restored.

Great guys to deal with...and they have a ridiculous range of colors available.
 
Spiider said:
Brightside did my frame and swingarm for my 1973 CB750 rebuild.
It looks great, and didn't cost an arm and a leg.
They actually borrowed my frame for the bike show as a demo it looked so good restored.

Great guys to deal with...and they have a ridiculous range of colors available.
Click to expand...

+100 Brightside guys are the sh**. They have tons of colors and are great guys to deal with. I would recommend anyone to drop in and check them out. Check out their work on facebook. Great stuff at great prices!!
http://www.facebook.com/group.php?gid=104458435683&v=photos
Forum Sponsor
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom