kink
New member
Are you looking for parts for your Daymak "Saigon" 150cc scooter? I know how hard it can be to get your hands on replacement pieces! Today is your lucky day...
I have an almost complete Daymak scooter which I am parting out. I have moved on to another motorcycle and was going to build this scooter up as a project but I don't really have the time. I have traded some of the parts away, but there are still lots of pieces to go. I am basically looking to get rid of this bike out of my garage, so make me an offer! I'm also potentially interested in trading for other motorcycle parts or accessories!
Here are some of the AFTERMARKET UPGRADE parts I have available:
* PERFORMANCE REAR SUSPENSION (Asking $100) - This was about $250 when I bought it and includes a fully adjustable dual suspension system for this bike. This was one of the best upgrades I did to the bike as it made it handle 100% better and offered a lot more control, especially with a passenger.
* CUSTOM POSITIVE FUEL PRESSURE SYSTEM (Asking $50) - I built and customized a positive fuel pressure system which provides a much more reliable fuel delivery to the carb. This includes a 1 amp electric fuel pump, upgraded fuel filter and a pressure regulator to keep the flow constant and prevent flooding. Also includes a relay and illuminated kill switch for the pump (which I had installed on the dash). I can provide instructions on how to install, if you're handy this should take about 2 hours to install and tune.
* UPGRADED BATTERY (Asking $40) - Upgraded YUASA battery with better CCA rating than stock
Here's a list of some of the STOCK OEM parts I have available. If you are looking for a part and it's not on the list below, please contact me and I'll let you know if I have it!
* COMPLETE ENGINE ASSEMBLY (will sell as a whole or would consider parting out individual components if the price is right)
* COMPLETE CARBURETOR
* THROTTLE CABLE (almost new)
* STOCK CARB JET AND UP-SIZE JET
* FULL EXHAUST AND MUFFLER
* DASHBOARD
* IGNITION
* LOCK/KEY
* COMPLETE TRANSMISSION ASSEMBLY INCLUDING ALMOST NEW BELT
* COMPLETE FRONT AND REAR DISC BRAKES: CYLINDERS, LEVERS, CALIPERS, DISCS, PADS, ETC
* ALL ELECTRONICS, WIRING HARNESS, FUSES, CONTROLS, ETC
* FUEL TANK
* STOCK REAR SUSPENSION
* BOTH WHEELS WITH ALMOST NEW TIRES ON THEM
* SEAT
* REAR RACK
* STORAGE TRUNK
* UNDER SEAT STORAGE BIN
* SPARK PLUG (Iridium upgrade) - very slightly used
* FULL SET OF LED BULBS which are compatible with this scooter - these draw less current than the stock bulbs and consequently improve battery performance
I also have some of the fairings, headlight, turn signals, tail light, floor board however as I was halfway through modding the bike some of the fairings as well as the frame are in non-stock condition and may not suit your needs... feel free to contact me via PM or reply to this thread for more details. The fairings are black and silver with stock paint/color.
I have an almost complete Daymak scooter which I am parting out. I have moved on to another motorcycle and was going to build this scooter up as a project but I don't really have the time. I have traded some of the parts away, but there are still lots of pieces to go. I am basically looking to get rid of this bike out of my garage, so make me an offer! I'm also potentially interested in trading for other motorcycle parts or accessories!
Here are some of the AFTERMARKET UPGRADE parts I have available:
* PERFORMANCE REAR SUSPENSION (Asking $100) - This was about $250 when I bought it and includes a fully adjustable dual suspension system for this bike. This was one of the best upgrades I did to the bike as it made it handle 100% better and offered a lot more control, especially with a passenger.
* CUSTOM POSITIVE FUEL PRESSURE SYSTEM (Asking $50) - I built and customized a positive fuel pressure system which provides a much more reliable fuel delivery to the carb. This includes a 1 amp electric fuel pump, upgraded fuel filter and a pressure regulator to keep the flow constant and prevent flooding. Also includes a relay and illuminated kill switch for the pump (which I had installed on the dash). I can provide instructions on how to install, if you're handy this should take about 2 hours to install and tune.
* UPGRADED BATTERY (Asking $40) - Upgraded YUASA battery with better CCA rating than stock
Here's a list of some of the STOCK OEM parts I have available. If you are looking for a part and it's not on the list below, please contact me and I'll let you know if I have it!
* COMPLETE ENGINE ASSEMBLY (will sell as a whole or would consider parting out individual components if the price is right)
* COMPLETE CARBURETOR
* THROTTLE CABLE (almost new)
* STOCK CARB JET AND UP-SIZE JET
* FULL EXHAUST AND MUFFLER
* DASHBOARD
* IGNITION
* LOCK/KEY
* COMPLETE TRANSMISSION ASSEMBLY INCLUDING ALMOST NEW BELT
* COMPLETE FRONT AND REAR DISC BRAKES: CYLINDERS, LEVERS, CALIPERS, DISCS, PADS, ETC
* ALL ELECTRONICS, WIRING HARNESS, FUSES, CONTROLS, ETC
* FUEL TANK
* STOCK REAR SUSPENSION
* BOTH WHEELS WITH ALMOST NEW TIRES ON THEM
* SEAT
* REAR RACK
* STORAGE TRUNK
* UNDER SEAT STORAGE BIN
* SPARK PLUG (Iridium upgrade) - very slightly used
* FULL SET OF LED BULBS which are compatible with this scooter - these draw less current than the stock bulbs and consequently improve battery performance
I also have some of the fairings, headlight, turn signals, tail light, floor board however as I was halfway through modding the bike some of the fairings as well as the frame are in non-stock condition and may not suit your needs... feel free to contact me via PM or reply to this thread for more details. The fairings are black and silver with stock paint/color.
Last edited:
