Windshield Recommendations

[mimico_polak]

Forum Sponsor

What about a Fly screen? That would be a better fit would it not?

I have a fly screen on the bike now specific to the bike. While it helps...it doesn't help a lot at speed.

The Chinesium windshield is my 'fix' while I decide what to do. For $45 I'm ok with that. Will install today and hopefully find some time on the weekend to go for a boot to test it out.

 

[mimico_polak]

Kapsco sells for the same price on the Jungle website -- returns are easy.

Amazon.ca

www.amazon.ca

I think your bike would look better with one an aftermarket Batwing.


View attachment 69403

Is it bad that I actually considered the Batwing....I should just embrace the hipster life.

 

[Mad Mike]

I have a fly screen on the bike now specific to the bike. While it helps...it doesn't help a lot at speed.

The Chinesium windshield is my 'fix' while I decide what to do. For $45 I'm ok with that. Will install today and hopefully find some time on the weekend to go for a boot to test it out.

TIP: run a strip of electrical tape around your bars before clamping the shield bars on. The bare clamps, even with the gaskets, will leave marks on your bars.

 

[mimico_polak]

TIP: run a strip of electrical tape around your bars before clamping the shield bars on. The bare clamps, even with the gaskets, will leave marks on your bars.

Good tip thanks!

 

[backmarkerducati]

Fit will depend on how adjustable the clamps are on the bars and you "ability" to trim the windscreen to clear gauges and the headlight.

 

[mimico_polak]

Fit like a champ. Some minor inconveniences (no rubber spacers so made some from spare I had nearby).



So many adjustments on the deflector I don’t know where to start….or what half of them do.

 

[Mad Mike]

Fit like a champ. Some minor inconveniences (no rubber spacers so made some from spare I had nearby).

View attachment 69419

So many adjustments on the deflector I don’t know where to start….or what half of them do.

I dumped the lip, nothing but vibration and whistling.

Had one on the Vstrom, and another on my FJR - couldn’t dial in either one.

 

[mimico_polak]

I dumped the lip, nothing but vibration and whistling.

Had one on the Vstrom, and another on my FJR - couldn’t dial in either one.

Will give it a whirl and then decide. Guy wanted $40 for the main screen….$45 for the pieces together…

 

[backmarkerducati]

With that much windshield, maybe a Miata would have been a better lifestyle fit

 

[mimico_polak]

So….as @Mad Mike mentioned earlier the windshield is good, but wobbles like a wet noodle at speed. I’m trying to figure out a way to make it more stable.

Currently it has 2 mounting points…



BUT….i have mounting arms that I got from a cheapo Amazon windshield where the vendor never asked for it back. The bracket is a bit off, but I can file it to make more space and it would fit.



Considering removing the mount brackets and mounting it into the ones in my hand.

Thoughts?

 

[Mad Mike]

So….as @Mad Mike mentioned earlier the windshield is good, but wobbles like a wet noodle at speed. I’m trying to figure out a way to make it more stable.

Currently it has 2 mounting points…

View attachment 69559

BUT….i have mounting arms that I got from a cheapo Amazon windshield where the vendor never asked for it back. The bracket is a bit off, but I can file it to make more space and it would fit.

View attachment 69560

Considering removing the mount brackets and mounting it into the ones in my hand.

Thoughts?

I’d remove the Lanmar lip to see if that makes a difference. I had one on my vstrom, took it off and it never went back on.

 

[Relax]

Does it currently only mount at the handlebars? If so, I'd try to find a way to make additional mounting points lower near the headlight.

 

[Relax]

Also, can the current mounts be adjusted closer together to give the windshield more of a curve to reinforce it?

 

[shanekingsley]

Both are perfect suggestions - get rid of the lip and figure out a way to brace it lower down.

 

[NuggyBuggy]

I’d also check to see whether the windscreen forces all the wind to hit it directly.

Sometimes addition of spacers will allow some wind to slip under the screen and reduce the overall pressure the screen sees. This may also help reduce buffering and wind noise depending on the rider’s height relative to the screen, as it may reduce the amount of dirty air presented at the rider’s head.

Another solution that can work is cutting some slots into the screen. Same idea.

Forum Sponsor