Who can work on my go cart?

Supersquid

Well-known member
Hi I built a gocart with a zx6r motor and I'm looking for someone to just install the electrical and get it to fire. It's been so long I forget some connections. Sounds stupid but I'm stuck and no one will even look at it except cycle source in Brampton and they are a joke. Anyone who even owns a 636 should be able to figure it out in no time
 
Where are you located? I know the 03-2013 ZX6R's like the back of my hand. Im located in Mississauga..Pm me
 
I got it running but #2 cylinder is not firing I'm getting spark and fuel. Was sitting for 2 years before this. I'm running an inline pump and bypass regulator I had thd wrong spring in and 140psi went to injectors, I put the right one in and it's at 45 psi I think it's close enough now could I have damaged an injector with the high pressure. Any other ideas. I was told if might be a stuck valve but was running mint when stored.
 
now I noticed #1 is not firing either. I swapped the coils and plugs #1 and 2 never worked swapped the injectors same thing, cranked it with injectors out and all spray what's next
 
now I noticed #1 is not firing either. I swapped the coils and plugs #1 and 2 never worked swapped the injectors same thing, cranked it with injectors out and all spray what's next
What's next? Take it to Johnny :)

Why did the engine come out of the bike to start with? My friend took a 07 R1 engine he got cheap and put it in his Banchee, spent tons of time and money and could never get it working right. Turned out to have a damaged #1 intake valve and it dropped some of the valve guide into the cylinder so piston and cylinder damage too.

If she's got spark and fuel but she's not running on that cylinder, you're missing air/compression ;) Get a compression tester and check all the cylinders.

-Jamie M.
 
Compression is 170-155-155-175
checked timing and it did not jump a tooth
is getting spark and fuel
i think is electrical timing problem,damaged ecu or something

Engine came out because I totaled it and parted what was left, I had if running after.
 
Last edited:
You say you swapped the coils but maybe the coils are bad?

Sent from my SH-02E using Tapatalk 2
 
Took it it Johnny and fixed it just by looking at it ... Real ****.
He is a god with Kawi engines, I think they whisper to him "fix me.... FIX ME, here is what's wrong..." hehe.

-Jamie M.
 
I dont think its me, its the atmosphere in the shop, they just feel at home......
IMG_1715_zpsa1dd76cc.jpg

Let me know when test and tune day is, I'll being the camera and first aid kit. That thing is going to be stupid fun and DANGER!
 
Last edited:
I dont think its me, its the atmosphere in the shop, they just feel at home......
IMG_1715_zpsa1dd76cc.jpg

Let me know when test and tune day is, I'll being the camera and first aid kit. That thing is going to be stupid fun and DANGER!
Sweeeeeeet setup :)

-Jamie M.
 
I dont think its me, its the atmosphere in the shop, they just feel at home......
IMG_1715_zpsa1dd76cc.jpg

Let me know when test and tune day is, I'll being the camera and first aid kit. That thing is going to be stupid fun and DANGER!

Wow man, that is one sick set up! What's the rough dimensions for that one bay?

And, I'm curious, where does one take such a go-kart to actually get out for some fun? It's not really out of my skill level to put something like that together, I just wouldn't have a clue where to take it!
 
Wow man, that is one sick set up! What's the rough dimensions for that one bay?

And, I'm curious, where does one take such a go-kart to actually get out for some fun? It's not really out of my skill level to put something like that together, I just wouldn't have a clue where to take it!

The room is 24'x 15' with an 8' wide garage door
 
Smoked some tires today thing is absolutely insane! but lasted 2 min till someone called the cops. Works flawlessly eccept for underpowered rear brake. Know of a place I can drive?

Did you drive that thing on a public street? lol
 
Back
Top Bottom