Turn Signals Not Working

[parrah]

Forum Sponsor

I am riding a Kawasaki Zx6r 2008.

And the other day when signaling to change lanes on the highway, I realized none of my signals were working.??

Just wondering if anyone has an idea what this may be.

Transfer Relay, Fuse?
How to fix ?

 

[Chaos]

first thing i'd do is check the fuses. bike manual or a google search should tell you where the fuses are on your bike.

 

[Low rider]

fuses or a bulb is blown, one electrical wire is disconnected on a blinker, relay unit is shorting, all kinds of reasons it could happen.
You have to check the entire circuit if the fuse is good.

 

[ViperZ]

Fuse or relay if all 4 blinkers are not working. Slight chance that all 4 bulbs are blown, but happens if you hit a big nice pot hole.

 

[insert]

if its one signal: bulb

if its multiple signals:
-check fuses, if those are good..
-i will bet on the relay

 

[Low rider]

A pot hole that causes all four turn signals to blow????

That must be one huge pot hole.



O.P.
Does your bike have aftermarket signals on it?

 

[N3WMAN]

Check fuse. If it's blown, replace it, check all signal bulbs. If it blows again in the near future, you have a short somewhere.

 

[icecube172]

relay problem, probably got one burnt our bulb

 

[dmartins]

Maybe the switch for your signals is broken or disconnected.

 

[sauga_rider]

did you check your blinker fluid level? it might be low

 

[Acadian1974]

Check fuse. If it's blown, replace it, check all signal bulbs. If it blows again in the near future, you have a short somewhere.

+1 I would add that it's a good idea to check for ground faults when you have to replace a fuse

 

[foggy17]

On some bikes, if one signal light quits, they all quit. If its not a fuse, it could be a short in a wire.

 

[GentlemanRacer]

You could get it fixed, or just get a Quebec plate instead.

 

[N3WMAN]

did you check your blinker fluid level? it might be low

Usually found next to the Elbow Grease.

Forum Sponsor