Tank Pad

[Mukala]

Forum Sponsor

I have this awesome batman tank pad. I got it last year and now I can't find them anywhere.

I was a newbie and put the tank pad to high and now the bottom is peeling?

Is there anyway I can peel the tank pad off and use some kind of adhesive to make the pad sticky again and out it back on the bike?

 

[LoneRonin]

to take it off, heat it up using a hair dryer or something then goo gone the sticky leftovers.

as for putting it back on, there's lots of stuff you can use to make it stick but it will probably be a pain in the *** if you ever want to take it off and it may **** up your tank's surface.

 

[Iceman]

After it's removed, paint thinner might renew the adhesive. Otherwise it's probably double sided tape.


Sent from my iPhone using Tapatalk

 

[LoneRonin]

After it's removed, paint thinner might renew the adhesive. Otherwise it's probably double sided tape.


Sent from my iPhone using Tapatalk

that's probably your best bet, I was thinking of some chemical adhesives but its not a good idea to use them.

 

[Mukala]

that's probably your best bet, I was thinking of some chemical adhesives but its not a good idea to use them.

Would double sided tape, harm the finish?

 

[peterm15]

Would double sided tape, harm the finish?

Not unless the finish around the tape fades.

Once you pull the tape off the difference in look can be buffed and polished out.

Sent from my SGH-I337M using Tapatalk

 

[Mukala]

decided to order another tank pad in the same size, glue my old tank pad to the new one and install. Anyone know of a heavy duty glue that works good to glue 2 tank pads together?

 

[DemonPig]

get crazy glue, use gloves.

Forum Sponsor