R6 Signal flicker with Vibration....

S

SWAT

New member
[TABLE="class: tborder, width: 100%, align: center"]
[TR]
[TD="class: alt1, bgcolor: #EFEFEF"]i got a 07 r6 and the turn signals work completely fine but the right signal flickers when i give it gas(vibration). i will tap the back under the seat area of the bike and the signal flickers so some loose wire or fuse is causing it but i dont know which or how to diagnose it. i bought this bike used so no owners manual here is a attached video of my bike and the issue.

willing to pay a local GTA/Milton tech to fix this crap!


https://www.youtube.com/watch?v=49JpkOfud18
[/TD]
[/TR]
[TR]
[/TR]
[/TABLE]
 
Probably just a loose or corroded connection. I'd check fuse, signal connectors, signal relay and ecu

Sent from my Nexus 4 using Tapatalk
 
Yikes. If you don't want to work on it yourself you could take it to Daniel, formerly of Heritage Auto, he loves difficult electrical problems! 416-707-0422
 
Before you pay someone on this. I would do a simple check take of your fairing and track you right turn signal to its connection point. Make sure they are tight and the wires are are not damaged and shorting out on the frame. Check the connectors for corrosion or damage that might be causing them lossen from vibration. Since its a newer bike i would imagine that its the connections are some kind of molex type type. Use a tiny screw driver to remove the metal contacts from plastic one at a time. check them over and i they look corroded spray with some contact cleaner and scrub with a tooth brush or smaller wire brush if you have one. after going this you might find it works if not the issue might be elsewhere.
 
You must log in or register to reply here.
Back
Top Bottom