Possible problem with injectors or wiring (2005 ZX6R)

[EMiranda]

Hello all,

Well i've been having issues getting my ride up and started after it's hibernation. Bike turns over and over but just won't fire. Battery is nice and strong, plus i have it on a tender to keep it topped up. At first i thought it was an issue with the spark plugs not sparking, so i replaced those and the bike still won't fire.

Next i checked fuel. I drained the tank and filled it with new gas, nothing. Made sure the fuel pump was pumping, and after a nice mess, ruled that out as well. Next went to the injectors. Pulled out the injector assembly (rail, injectors and bracket that holds everything together) and sprayed some fuel down into the throttle bodies and cranked her. She started up then died as expected, so i know the plugs are firing ok, but i also noticed when i cranked it, the injectors didn't spray a thing. Had all my electrical hooked up properly but they still wouldn't spray fuel.

I had my neighbor come over with a multimeter and test the electrical plugs that connect to each injector. He read resistance, but no current even when cranking the bike. Could this possibly mean the wiring harness has gone bad, or are my injectors bad? Any help is greatly appreciated.

Bike is a 2005 Kawi ZX6R in case you missed it in the title.

 

[frekeyguy]

Gotta test everything out to see what's causing the issue. IF there is no voltage comming to your injectors, its something with to do with the wiring or ECU....there should be a reason why the primary injectors aren't firing.

Is the idle circuit injectors in the air box working?

 

[AC]

tip over sensor plugged in/working? I think the bike will crank but not fire if its not plugged in? I forget

 

[frekeyguy]

tip over sensor plugged in/working? I think the bike will crank but not fire if its not plugged in? I forget

would it have spark though?

 

[AC]

would it have spark though?

I'll try it this afternoon if I get a chance to work on my bikes