Need machine shop / machinist recommendation

[Relax]

Forum Sponsor

Willing to go anywhere in the GTA or further for one that does small jobs for a fair price. I need a set of clip-on risers enlarged from 50 to 53 mm, and I've been told to "offset the boring operation to make most of the cut in the thicker part of the clamp. A good machinist can do it using a spacer in the clamp gap and tightened bolts".

I can't just buy another set in 53 mm because they're only available in 50.

 

[ifiddles]

Try John at Motorcycle Enhancements in Oakville...I know they do custom work so they might be able to help...

Motorcycle Enhancements

We are a FULL SERVICE MOTORCYCLE repair shop located in Oakville, Ontario. We work on all makes and models!

www.motorcycleenhancements.com

 

[Mad Mike]

Willing to go anywhere in the GTA or further for one that does small jobs for a fair price. I need a set of clip-on risers enlarged from 50 to 53 mm, and I've been told to "offset the boring operation to make most of the cut in the thicker part of the clamp. A good machinist can do it using a spacer in the clamp gap and tightened bolts".

I can't just buy another set in 53 mm because they're only available in 50.

Thats a simple operation, any machine shop can do it. Many will hesitate if they know you are altering a motorcycle part, tell them the part is for a video game controller.

 

[Priller]

I struggled to find a known shop to make a sleeve, but was put onto a guy in Whitby by a race shop who was too busy for my small order. His name is Terry, and the shop is Quadra Machining:

Quadra Machining

He did great work, was fast, and very reasonably priced. I'd highly recommend him...

 

[TK4]

Wasp Performance Engines​

845 Westney Rd S, Ajax, ON L1S 3M4

 

[Mad Mike]

There is a small guy at 15 lHeritage Rd in Markham. He used to do stuff for me, he also for Racers5 and SpeedWorx.

No CNC, he's an old school tool and die maker that likes fun stuff. Fine Edge Grinding & Machine.

 

[Relax]

Thanks for all the suggestions.

 

[SteveM.]

Wasp Performance Engines​

845 Westney Rd S, Ajax, ON L1S 3M4

Willie is still in the game?
I have an old Honda engine that passed through his shop that i need some info on.

 

[TK4]

Willie is still in the game?
I have an old Honda engine that passed through his shop that i need some info on.

Still there, and still crazy after all these years.

Forum Sponsor