Need carb synch tool.

[arekzjawin]

Hello there good folk of gtam. I have been trying to revive an old ninja (Gpz) 600. Not used for a decade required some cleaning and love. Carb internals looked ok after cleaning. Got it running last night but cylinders 2 and 3 are running rich (red hot headers) and it runs uneven.

Need to borrow a carb synch tool (vacuum meter) to get it run smooth. I am in the west end by 427. Would need it for couple of days.

Cheers.

 

[inreb]

2+3 are running lean, possible air leak between carb and head or restricted jets.

 

[DemonPig]

I have a Uni-Syn from Edelbrock.

You can borrow that but not until late next week as I'm on vacation.

I work Dixie and Dundas. Reside in Clarkson.

 

[Riceburner]

or make your own...
http://www.650ccnd.com/mano.htm

 

[arekzjawin]

DemonPig I will take you up on your offer, but maybe there is someone that has the tool available earlier.

 

[regder]

You're welcome to borrow/buy my MotionPro SyncPro. Borrow for free, or buy it for $50

You'll have to pick it up from Thornhill though

 

[arekzjawin]

I sent you a msg. I would be happy to buy it. Let me know when I should make my way to Thornhilll.

 

[TwistedKestrel]

2+3 are running lean, possible air leak between carb and head or restricted jets.

I'm with this guy - you're gonna still gonna need a sync at some point, but you gotta fix this first. The sync won't fix a lean problem

 

[arekzjawin]

Yes, I will change the mix a bit, once the temp is equal across, I will sync. I picked up the tool from Redger (btw, thanks again), and will try to spend some time on it this weekend.

 

[CruisnGrrl]

I recommend a colour tune as well, lets you know lean or rich http://www.carbtune.com/colortune.html