i dropped my 2009 hyosung in the car wash and now its not moving | GTAMotorcycle.com

i dropped my 2009 hyosung in the car wash and now its not moving

shayne1990

shayne1990

Member
i was washing my bike and like an idiot i dropped it. now its not even moving, when i put it in gear and when the bike is in gear its not even stalling when i release clutch lever, now it sat overnight and it just stalls right away when its in gear . any ideas???
 
Last edited:
no it wasn't even stalling when i put it in gear and letting go of the clutch, it sat over night now it just stalls right away
 
Sounds like a kickstand switch problem.
 
if it was kick stand wouldn't it have stalled when i first was leaving that night.
i had it in all the gears and it wouldn't stall.
 
If something got bent in the tip over the switch might not be correctly registering as up. It might have got jammed or activated on a weird angle the first time but repeated use made it worse.

A downed stand will kill the engine when you put it in gear regardless of clutch position, on most bikes, as far as I know.

Edit:
Clutch weird you say? See if you can run it on a stand, could well be the problem if it has lost adjustment.
 
Last edited:
Aslan said:
If something got bent in the tip over the switch might not be correctly registering as up. It might have got jammed or activated on a weird angle the first time but repeated use made it worse.

A downed stand will kill the engine when you put it in gear regardless of clutch position, on most bikes, as far as I know.

Edit:
Clutch weird you say? See if you can run it on a stand, could well be the problem if it has lost adjustment.
Click to expand...

Aslan's answer is most likely right.

However... If you were having clutch problems before, this might expand on some other possibilities. When you put it in gear, does the bike jump forward a bit? If it does, this might indicate that the clutch is dragging. Check the free play on the clutch lever.
 
You must log in or register to reply here.

Back
Top Bottom