Help Required - Work Benches

Jampy00

Jampy00

Well-known member
Site Supporter
Forum Sponsor
Howdy Folks.

Looking to see if anyone is interested in building a few work benches (2x4 & plywood) for my small business.
Of course you should have the required skills & tools to build them and I am happy to help.
They will have to built on site (in Georgetown) all safety protocols are in place.
I will of course cover all expenses etc.

I have no problem buying some, but figured I'd ask..

Let me know if you are interested?

Thanks.
 
The benches are for shipping and assembly work, 2x4's and 1/2" plywood would make them strong enough to handle my work load. 100lbs-ish at the maximum. They will never get wet (unless I spill my coffee) I don't have a design but I am thinking 3 x 8 tops with a 1 x 8 lower shelf and 40" height. I would require 2 benches.
 
Have you considered using pallet racks? 8' width is a standard size, but not sure about 36" depth - although 30" and 48" are. The height of the end frames can be cut, or you could leave them tall for additional overhead storage.
 
Jampy00 said:
The benches are for shipping and assembly work, 2x4's and 1/2" plywood would make them strong enough to handle my work load. 100lbs-ish at the maximum. They will never get wet (unless I spill my coffee) I don't have a design but I am thinking 3 x 8 tops with a 1 x 8 lower shelf and 40" height. I would require 2 benches.
Click to expand...
Think about putting them on casters. Like toolboxes, it's handy to be able to wheel benches around if you have space.
 
Found some on sale at Home Depot. Thanks for the replies.
 
You must log in or register to reply here.
Back
Top Bottom