GSXR FI code c32 | GTAMotorcycle.com

GSXR FI code c32

sauga_rider

sauga_rider

Well-known member
Site Supporter
had my first ride last week and a few hours in, my FI light came on, bike started to sputter at acceleration, and just didn't sound normal at idle. the light went away when i turned the bike off then on, but the same issue happened again after about 20 min. but now the light comes on almost immediately after starting the bike.

the spark plugs are fine. only thing i did differently this year was adding a speedo healer, turned the bike on with the SH unplugged, but still had the same issue.

bike is an 03 gsxr 750 with 70k
FI code is c32-fuel injector signal #1.

has anyone experienced a simillar issue, or have some advice for me before i'm forced to get it looked at ?

thanks.
 
#1 means the problem is with the injector on the front cylinder. Turn the ignition switch OFF. Check the injector coupler for loose or poor contacts. If OK, then measure the injector resistance. Disconnect the TP sensor/injector coupler and measure the resistance between lead wires. Injector resistance: 12 - 18 Ohms at 20°C (68°F) Yellow/Red to Gray/White If OK, then check the continuity between Y/R wire and ground. It should be infinite Ohms Y/R to Ground

from somewhere else
 
You must log in or register to reply here.

Back
Top Bottom