attempting to turn the f4i into a street fighter....took the front end off, once i did that the bike wont turn over. i know that it has something to do with the peice that connects to the front end (lights) but im not technical enough to figure it out on my own.... anyone know what i could do to get around this?
|
|
|
f4i wont turn over
- Thread starter w33z11
- Start date
PLau
Well-known member
Not that I know how to solve this but why the hell would you use grey text on a white background?
theassassin
Well-known member
Tip over sensor or drop sensor is a semi-cylindrical shaped switch that must be oriented correctly. It kills the ignition and fuel pump if the bike falls over. It lives near the gauges and headlight area of your wiring harness.
Last edited:
for those who may be curious this is the answer:
in the middle of the headlight is your tip over sensor, without that plugged in it will not run....That is your problem...You have 2 simple choices, remove it from the headlight and mount it right side up on the bike and keep it plugged in...Or there are 3 wires that run to it...Take the 2 outside wires and jump them together and leave the middle one . This will make the ECU think its plugged in and the bike will run
in the middle of the headlight is your tip over sensor, without that plugged in it will not run....That is your problem...You have 2 simple choices, remove it from the headlight and mount it right side up on the bike and keep it plugged in...Or there are 3 wires that run to it...Take the 2 outside wires and jump them together and leave the middle one . This will make the ECU think its plugged in and the bike will run
|
|
|
|
|