Exhaust pipe bending | GTAMotorcycle.com

Exhaust pipe bending

J

j2

Well-known member
Forum Sponsor
I'm restoring a 1977 KZ650.

I managed to find a used Kerker on eBay for a later model and took a chance and bought it. The header fits perfectly but muffler is touching the swinger. I need the collector pipe bent about Half an inch to clear it.

Could an muffler shop do this? I was also thinking of trying Gator as I believe they do custom exhaust systems

Thanks in advance
 
j2 said:
I'm restoring a 1977 KZ650.

I managed to find a used Kerker on eBay for a later model and took a chance and bought it. The header fits perfectly but muffler is touching the swinger. I need the collector pipe bent about Half an inch to clear it.

Could an muffler shop do this? I was also thinking of trying Gator as I believe they do custom exhaust systems

Thanks in advance
Click to expand...

Many can.

I've had a complete custom connector bent in the past by a company in Richmond Hill. If I remember the name I'll post it, but just call around.
 
Found it. Toronto Muffler and Brake/Hot Rod Scott's - 815 Kipling - Don't know why i thought it was in Richmond Hill
 
Last edited:
@j2 +1 for Hot Rod Scotts. Me, my brother and at least 5 other guys I personally know have gone to them for custom exhausts. They were, however, for lowered trucks.

Sent from my custom purple Joe Bass mobile device using Tapatalk
 
Researched GTAM some time back and came up with this information for the same question:

C K Welding Ltd
Kai
Address: 110 Silver Star, Toronto, ON M1V 5A2
Phone: (416) 291-3887




Zoro Muffler 2580 Stanfield Rd (near Dundas St & Dixie Rd.) 905-897-6833


Aaron at Weirtech in Burlington.
Weir Technologies Inc.
5035 North Service Rd. D10
Burlington, ON. Canada L7L 5V2
Text or Call: (905) 802-4703 . http://www.weir-tech.com/
aaron@weir-tech.com


GC Alloyweld at
2300 Finch W (at Weston Road)
(416) 746-0973
Try these guys they do repairs to bike parts - I took my part there and they did an excellent job - tell them its aluminum - paid $25-30est.




Grand Valley Specialty Welding
35 Saltsman Drive
Cambridge, ON
N3H 4R7
Phone: (519) 650-1699
Fax: (519) 650-3794
A really good welder can be hard to find.These folks are the best i have ever seen.A bit of a drive though. http://www.gvsweld.com/


Vangro Welding
726 Dundas East (southeast corner of Cawthra/Dundas)
905 279 6082


Dysant Welding
1050 Kamato Road , Unit-9
(905) 238-8707


Vangro will be cheaper.




Hot Rod Scott's is located on the Northeast Corner of Kipling Ave. & Norseman St
815 Kipling Avenue
Toronto, Ontario M8Z 5G8
Canada
Toll-Free (Canada & USA): 1-888-898-3380
Telephone: 416-236-0677
Fax: 416-234-1975
Email: scott@hotrodscotts.com
if anyone ever needs, snow city tipped me off last week to go to Hot Rod Scott's. Hot Rod Scott's is located on the Northeast Corner of. Kipling Ave. & Norseman St. Highly recommended, they stopped what they were doing fixed my midpipe, and only charged me $40 cash.




Majestic Muffler & Custom Exhaust Inc.
6462 Kingston Road,
Scarborough, Ontario
M1C 1L4
Phone: (416) 287-1807
Fax: (416) 287-8912
Email: majesticmuffler@rogers.com
Hours of Operation: Monday to Friday - 9am to 6pm, Saturday - 9am to 1pm


call ted at rosey toes, there is a welder the next unit down from his shop 416-241-2523




Autoweld
345 Nantucket Blvd., Unit 25, Scarborough (416) 288-6866
Nice guy, John, running the place. $60 to do the job of welding the shock mount on my K75. limited capability to just TIG.
 
You must log in or register to reply here.

Back
Top Bottom