Gixxer4Me
Well-known member
these are brand new with tags, never used or has it been steped on ashphalt, just tried on indoors. these are the current top of the line model with many removable parts includeing sole.
purchased from us for 475 plus shipping and 18% duties and 13% taxes. asking 475 CAD.
The Vortice The latest in technology combined with the great skill and workmanship of Sidi's Italian based factory technicians blend in a whirl of fresh solutions to satisfy a rider's desire for safety and comfort.
Features:
Constructed of Lorica and is lined with Teflon vented mesh. Only Sidi goes to trouble and expense of creating a multiple liner boot system in its racing boots. Loricais a composite micro fiber material created from strands that are so fine, each one is less than one thousandth the thickness of silk. When injected with special resins, these fibers act like natural leather skin, but with the addition of better strength, softer texture, lighter weight and better moisture protection.
Sidi has added a small elastic panel to aid in a smooth zipper operation as it allows a bit of movement via the elastic as the zipper passes over the rider's ankle ball.
The rear upper part of the boot is made up of the following mechanisms:
A) The TECNO CALF TENSIONER mechanism adjusts the leg circumference. Placed in the back of the boots upper, it works through a nylon wire that hooks directly to the shin plate;
B) The TECNO SHIN TENSIONER mechanism helps the TECNO CALF TENSIONER close the leg upper on the front part of the boot. The two lateral nylon braces join the ankle joint with two screws that are protected by nylon caps. This system is reinforced with fiberglass, supports the ankle and is easy to replace. This system allows excellent flex movement front-to-back while being firm side-to-side.
Air Ventilation System: a third brace is positioned on the outer-lower part of the boot and features an air intake that can be operated by an aerodynamic shaped button.
Tecno Instep Tensioner, a fastening system on the front part of the foot, on the instep.
Shock Absorbing Heel Cup
Fully vented
Shin Plate
Gear Change Pad
Vortice Slider: toe slider is made in nylon reinforced with fiberglass. It is fitted with a new air intake and an innovative alloy insert.
Racing SRS Sole: all new sole is constructed of a polyurethane and rubber blend. parts of the boot can be replaced.
purchased from us for 475 plus shipping and 18% duties and 13% taxes. asking 475 CAD.
The Vortice The latest in technology combined with the great skill and workmanship of Sidi's Italian based factory technicians blend in a whirl of fresh solutions to satisfy a rider's desire for safety and comfort.
Features:
Constructed of Lorica and is lined with Teflon vented mesh. Only Sidi goes to trouble and expense of creating a multiple liner boot system in its racing boots. Loricais a composite micro fiber material created from strands that are so fine, each one is less than one thousandth the thickness of silk. When injected with special resins, these fibers act like natural leather skin, but with the addition of better strength, softer texture, lighter weight and better moisture protection.
Sidi has added a small elastic panel to aid in a smooth zipper operation as it allows a bit of movement via the elastic as the zipper passes over the rider's ankle ball.
The rear upper part of the boot is made up of the following mechanisms:
A) The TECNO CALF TENSIONER mechanism adjusts the leg circumference. Placed in the back of the boots upper, it works through a nylon wire that hooks directly to the shin plate;
B) The TECNO SHIN TENSIONER mechanism helps the TECNO CALF TENSIONER close the leg upper on the front part of the boot. The two lateral nylon braces join the ankle joint with two screws that are protected by nylon caps. This system is reinforced with fiberglass, supports the ankle and is easy to replace. This system allows excellent flex movement front-to-back while being firm side-to-side.
Air Ventilation System: a third brace is positioned on the outer-lower part of the boot and features an air intake that can be operated by an aerodynamic shaped button.
Tecno Instep Tensioner, a fastening system on the front part of the foot, on the instep.
Shock Absorbing Heel Cup
Fully vented
Shin Plate
Gear Change Pad
Vortice Slider: toe slider is made in nylon reinforced with fiberglass. It is fitted with a new air intake and an innovative alloy insert.
Racing SRS Sole: all new sole is constructed of a polyurethane and rubber blend. parts of the boot can be replaced.