Attack Triple setup!!!

[gixxersquid77]

I bought a set of these over the winter and now have them installed on my 06 GSXR1000 and I have just a couple of questions..
I would like to know what some of the people are running there off-sets at at these two tracks...Bogie and TMP?? I currently running the 2mm ones now. My bike is a double duty bike right now. I like how it feels now on the street but track conditions are much different. I run dunlop 211 on the street 190/55 and dunlop slicks on the track 195/65 rear and 125/80 front. The rear is raised 6mm at the ohlins shock and the front tubes are level with the top triples with ohlins valving. Thanks.

 

[caboose56]

What is stock fork offset for that bike and what would Attack's with zero inserts be?

Right now I'm running my ZX10 with the forks moved 1mm inboard (1mm less offset) from stock. Smaller offset makes for better turn in and agility but at the expense of stability. However, the extra stiffness of the Attack clamps does make up for some of the compromised stability.

 

[JohnnyP636]

I recently bought Attack triples from a local racer for a 09+ ZX6R, he told me he asked Attack for the same offset they run on their ZX6R race bikes and it was 2mm....Although I dont think that will help you, as offset preference is different for each bike and each rider....There is no best offset, only what suits each rider best...You might like 5mm while I might like 2mm....If you really want to dial it in you will need to buy different offsets and try them