Ordered a set of levers for my GF's 09 R6 and she absolutely loves them! Tons of adjustability, she likes full brake and shorty clutch so it was very easy to just adjust these levers to the perfect length for her fingers! Talk about custom fit!
They are bi-folding, CNC T6061 aluminum with hard anodized coating, laser engraved logos.
Her's say YZF on them like in the first pic:
I was a little worried at the whole sliding lever thing, is the entire lever extension part held on by that little screw? Serious? lol. Luckily it's not. What's hard to see in the pic is that the bottom of the main lever part is machined like a dovetail so the lever is sliding on rails, the screw just locks it in position from sliding in or out, it doesn't take any of the pressure from the lever extension at all.
Things that impressed me over other ebay levers I've installed/used:
1. Super tight fit and tolerances. No lever wobble, slides into the mount perfectly, nice brass bushings, etc.
2. The bi-folding mechanism is super high quality. A nice tight hard lock in its normal position. Other bi-folders I've tried, you can make the lever fold by accident by just brushing your fingers up against it. These, no way.
3. The anodizing. Super even colour throughout. Nice deep rich colours (the royal blue and red are super nice).
4. Retarded fast shipping! I ordered on Monday at 5:35pm and received my levers on Thursday at 5pm, same week! FROM CHINA!
5. The laser engraved logos are super nice quality/resolution!
My only beef is they were supposed to include these instructions with the levers (which was missing):
So, for my girlfriends 09 R6 we tried to install the levers before she left for work. Brake lever went on easy, 8 min install. The clutch lever, the bushing was way to big for the pivot bolt!! All loose and wobbly. I noticed the bushing in the stock lever and the bushing in the aftermarket lever had the same O.D. so I used my vice and pressed the stock bushing into the lever (pushing out their brass bushing). Took A LOT of force, but worked perfectly. After install it works flawless.
She liked them so much, and I read on their website they do CUSTOM logos for $5 extra, I figured I'd order up a custom set for my Fiat edition 09 R6S
SWEEEEEEET! I just e-mailed them and said I want 09 R6S (canadian edition) levers, Royal Blue main lever, silver slider, red adjusters, with FIAT/YAMAHA laser engraved logo on them and they e-mailed me back 180 seconds later (serious) and said $99 shipped express no problem! I said "what about the $5 for the logo" and they said they have the FIAT YAMAHA logo already setup for the laser engraver, so no extra charge! They e-mailed me a pic of the lever with the logo for my approval, boom, done, ordered in about 7 mins start to finish, and they shipped my levers AN HOUR AND A HALF LATER by DHL Express! NUTS!
LICK FOR HIGH RES!
Super nice, great colour, tight tight tight.
Anyway, their ebay store is called AdjustableLevers and you should be able to get to it by going here: http://stores.ebay.ca/adjustablelevers?_trksid=p4340.l2563
-Jamie M.
They are bi-folding, CNC T6061 aluminum with hard anodized coating, laser engraved logos.
Her's say YZF on them like in the first pic:
I was a little worried at the whole sliding lever thing, is the entire lever extension part held on by that little screw? Serious? lol. Luckily it's not. What's hard to see in the pic is that the bottom of the main lever part is machined like a dovetail so the lever is sliding on rails, the screw just locks it in position from sliding in or out, it doesn't take any of the pressure from the lever extension at all.
Things that impressed me over other ebay levers I've installed/used:
1. Super tight fit and tolerances. No lever wobble, slides into the mount perfectly, nice brass bushings, etc.
2. The bi-folding mechanism is super high quality. A nice tight hard lock in its normal position. Other bi-folders I've tried, you can make the lever fold by accident by just brushing your fingers up against it. These, no way.
3. The anodizing. Super even colour throughout. Nice deep rich colours (the royal blue and red are super nice).
4. Retarded fast shipping! I ordered on Monday at 5:35pm and received my levers on Thursday at 5pm, same week! FROM CHINA!
5. The laser engraved logos are super nice quality/resolution!
My only beef is they were supposed to include these instructions with the levers (which was missing):
So, for my girlfriends 09 R6 we tried to install the levers before she left for work. Brake lever went on easy, 8 min install. The clutch lever, the bushing was way to big for the pivot bolt!! All loose and wobbly. I noticed the bushing in the stock lever and the bushing in the aftermarket lever had the same O.D. so I used my vice and pressed the stock bushing into the lever (pushing out their brass bushing). Took A LOT of force, but worked perfectly. After install it works flawless.
She liked them so much, and I read on their website they do CUSTOM logos for $5 extra, I figured I'd order up a custom set for my Fiat edition 09 R6S
SWEEEEEEET! I just e-mailed them and said I want 09 R6S (canadian edition) levers, Royal Blue main lever, silver slider, red adjusters, with FIAT/YAMAHA laser engraved logo on them and they e-mailed me back 180 seconds later (serious) and said $99 shipped express no problem! I said "what about the $5 for the logo" and they said they have the FIAT YAMAHA logo already setup for the laser engraver, so no extra charge! They e-mailed me a pic of the lever with the logo for my approval, boom, done, ordered in about 7 mins start to finish, and they shipped my levers AN HOUR AND A HALF LATER by DHL Express! NUTS!
LICK FOR HIGH RES!
Super nice, great colour, tight tight tight.
Anyway, their ebay store is called AdjustableLevers and you should be able to get to it by going here: http://stores.ebay.ca/adjustablelevers?_trksid=p4340.l2563
-Jamie M.
Last edited:
