600 rr clip on issues

K

KTA600RR

New member
hey people, got a set of vortex 7 degree clip ons for my 07, CBR 600RR and a set of v3 levers, no matter how i set them up the bars crush my thumbs at full turn and the brake hits the body when turning left, has anyone had any issue's or am i just retarded?
 
I had the same issue when I put Woodcraft clip ons on my 05.
The OEM clip ons have a 1.5" rise, so anything less than that will give you little to no clearance.

8299356560_50a08316fb_z.jpg


Solution? Keep your stock clip ons like I did or order clip ons with a 1.5" rise. There is no other way around it.
 
post a picture of your setup.
 
i had the 600rr vortex clipons before...the problem with them are that they have no rise...the woodcraft clipons have rise on them, i sold my vortex clipons afterwards. the clipons would hit the front cowl, it wasnt a deal breaker since you rarely spend much time in full lock, but definitely not preferable.
 
Last edited:
TomC said:
i had the 600rr vortex clipons before...the problem with them are that they have no rise...the woodcraft clipons have rise on them, i sold my vortex clipons afterwards. the clipons would hit the front cowl, it wasnt a deal breaker since you rarely spend much time in full lock, but definitely not preferable.
Click to expand...

Its not just clearance, you are also moving your body position, down 1.5" is a lot, could be good for your riding style could be bad...... Personally I wouldnt want to have my bars lowered 1.5", thats too low for me, makes me lean forward too much
 
You must log in or register to reply here.
Back
Top Bottom