hey guys, i havea 2011 kawasaki ninja zx6r i need some helpw with replacing the fairngs and the handle bar, my service manual isnt here yet or i would have done it myself.
|
|
|
2011 kawasaki ninja zx6r, i need help replacing the mid and lower fairing as well as
- Thread starter shahfaisal
- Start date
wearelopey
Well-known member
Most likely any shop will be able to help you out, heck if you wait around long enough people on this site might be able to tell you torque specs etc for everything.
Try to google what you need to do, most likely someone has already done it and posted it up.
Try to google what you need to do, most likely someone has already done it and posted it up.
09-11 is kind of complicated, you have to basically remove the upper, sides, and headlight as a complete unit to change either side....Then the headlight needs to come out, and bunch of screws hold each side to the upper from the inside...
For the handle bar you need a 36mm socket for the top nut, and a tamper proof torx bit for the damper.
For the handle bar you need a 36mm socket for the top nut, and a tamper proof torx bit for the damper.
ohh, would any of you guys bwe able to do it for me, since its my first time i would rather watch and learn the first time, compensating for your time/efforts is not a problem lol
|
|
|
|
|