1991 ZX7 fuel filters & sidestand wiring.

smudger

smudger

Well-known member
Morning guys,
I'm in the process of converting my ZX7 to track use I'm renewing all filters etc etc & when I stripped the bike down I noticed there are 2 fuel filters - the OEM filter between the tap & pump & then a secondary filter (non OEM???) between the pump & the carbs - they are highlighted on the picture below.
  • Anyone know why the 2nd filter would be fitted?
  • Should I keep it & if so how do I know which one or where to buy it from?

Also, in the picture below I have highlighted the sidestand wires - when I remove the sidestand I'm thinking these are the 2 wires I should be connecting together to complete the circuit so the bike will run without the stand fitted - is that correct?

Thanks in advance gents.

View attachment 36177
 
Neither of those filters are oem. The one on the left should fit snug in that rubber strap so it's been replaced by a generic filter. Not that there is anything really wrong with that. A 2nd filter seems unnecessary, I did buy an OEM filter for my 7R many years ago and I remember it not being very expensive (then it will fit in that rubber strap nice like).

Yes, connect those side stand wires together.
 
Hmm. I would have though it would fit in that rubber strap better.


Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.
Back
Top Bottom